Bringing you the best Preparedness articles from across the Internet for over 10 years!
Tuesday, November 30, 2021
Safe Winter Driving Tips Everyone Should Know
According to the U.S. Department of Transportation’s Federal Highway Administration, Americans average more than six million vehicle crashes every year. Of those, nearly a quarter, or more than 1.5 million, are weather-related, defined as a crash occurring due to impaired visibility from rain, sleet, snow, fog, or on roadways covered in rain, snow, or ice.
Casualties in weather-related crashes count more than 7,100 people killed and 629,000 injured. Financial damages from these accidents add up to millions of dollars.
By the nature of my job, I travel a lot and on a near-monthly basis find myself driving the 2½ hours to the nearest airport. I’ve made this and other trips in all manner of road conditions, from hot and dry to near-zero visibility. Call it brave or stupid, and I often push the edge of what kinds of conditions I find myself driving in.
To ensure I get there and back safely, I tracked down an old friend, Robert, who’s working at the Bridgestone Winter Driving School, to get some safe winter driving tips on how to drive on snow and ice. Here’s what he said.
12 Natural Pest Remedies
By Linda Loosli
Enjoying your home and garden is impossible when you have a critter or bug infestation on your hands. It may surprise you, but you don’t have to head to your local lawn and garden store to figure out a solution in order to battle your current crisis. Keep reading to discover natural pest remedies.
That’s right, you probably have a majority of these natural household solutions already in your home. They’ll save you a great deal of money instead of having to buy pest control services or try to apply store-bought materials. At the same time, you’ll help keep your pets from getting into something that they shouldn’t. These are natural pest remedies that are safe and effective to use around your home and garden. In case you missed this post, The Best Herbs To Grow In Mason Jars
It’s rather unappealing when you have fruit flies hovering around in your kitchen, and they always seem to know the perfect time to show up, right before you have visitors. Take back control of your kitchen by pouring some apple cider vinegar into a bowl with a drop of liquid dish soap and then covering it up with plastic wrap. Then make tiny holes in the plastic and the vinegar should draw the fruit flies in, but they won’t be able to get back out.
2. Banana Peels
Being a gardener myself, I know firsthand how irritating aphids can be when they begin holding social gatherings in my garden. If left untreated, they can destroy all of the hard work and love you’ve put into our garden. I have a win-win natural remedy for you. By placing banana peels near the stem of your plants, it should keep the aphids away, and also help to enrich the soil of your garden.
3. Basil
Sweet basil is a member of the mint family that tastes great in pasta, salads, pizza, and several other recipes. Yet it can be used as a natural pest remedy when you’re dealing with kamikaze flies in your home that are buzzing past your ear. To keep those pesky flies from ever finding their way into your home, plant a pot of basil in a sunny location near a nearby entranceway. It should help to deter them. How To Grow Basil In The Garden
4. Cloves
Many people find ladybugs to be one of those bugs that they can tolerate, but that rare exception to the rules may change when they start to invade their house. As it turns out, ladybugs don’t like strong scents, which is why placing a bag of cloves near a heavily infested area is a great solution. You’ll just have to sweep or vacuum up the cloves when your situation has improved.
5. Coffee Grounds
The next time that you make a pot of coffee, don’t throw out the coffee grounds after you’re done. It turns out that critters and other small pests don’t like the smell of coffee, which I find totally bizarre because it smells so good. For ants, it’s actually fatal. Wherever you think critters are coming in, place some coffee grounds there and they won’t continue to come around.
6. Cornmeal
For those of you with pets, you certainly don’t want to go with an ant killer that is toxic because your furry loved ones can get sick from it. Instead, place small piles of cornmeal where you notice that ants are hanging around. While they will eat it and take it back to their colony, ants aren’t capable of digesting it. This method may take a couple of days, but it has proven effective.
7. Egg Repellent
Have you been noticing deer activity out in your garden recently? Instead of reaching for your rifle like you may be tempted to do, choose to go with an egg repellant that can get the job done. That way you’re not scaring your neighbors half to death and those rascally deer can continue grazing elsewhere. The mixture consists of combining 20% eggs and 80% water that has been run through a blender and then you simply spray your plants and tree leaves with it. This is not one of the very well-known natural pest remedies, but it works!
8. Essential Oils
Are you in desperate need of a dust mite repellant spray? You can use a mixture of lavender, eucalyptus, peppermint, or rosemary oil with a spray bottle of water, and then lightly mist your mattress with it. Allow it to air dry, and the dust mites should stay away.
9. Fresh Herbs
An evening out by the bonfire with family and friends can be going great, but once the mosquitos start to crash the party the fun you were having will be forgotten. Fortunately for you, there is a solution. Keep mosquitos at bay by throwing fresh sage or basil directly onto the fire and let the good times carry on.
10. Hot Pepper Spray
Hot peppers can even be difficult for people to eat at times, and for pests and critters, it’s awful. You can use your own chopped-up peppers, or use hot pepper flakes, but cayenne probably works the best. You’ll then mix it with a gallon of water and then spray it over your garden. Here’s more on how to make hot pepper spray along with a few other household items that will keep garden pests away.
11. Onions
Old wives’ tales are more often brushed aside as nothing but complete nonsense and silly superstition, yet this one actually has some truth to it. To keep spiders from hanging around and creeping about your home, slice up an onion and then put it in a bowl of water. You will then want to strategically place it where you think that they may be coming in, and they should get the hint that their presence in your home is unwelcome.
12. White Vinegar
Once a scout ant has detected food somewhere inside your home, it won’t be long after that you’ll have a trail of ants marching in to stake their claim. To help wash away the trail, spray a solution of 2 cups of water, ¼ cup of white vinegar, and 10 drops of eucalyptus oil or peppermint and the ant activity should dissipate.
Final Word
Everyone should be able to live comfortably and without any worry of outside pests making their way into their home or garden. By using these natural pest remedies that I’ve mentioned above, you will have both a safe and effective way to keep these intruders out. What are some natural pest remedies you know about or have experience using? May God Bless this world, Linda
Monday, November 29, 2021
11 Survival Hacks Using Soda Cans
By Steve Nubie
They’re Strong, Flexible, Sharp, and Very Adaptable.Whether you’re in a wilderness survival situation or without heat in a Texas snowstorm, some survival hacks using aluminum soda cans could quickly save the day.
A few simple tools can make quick work of soda can craft, but even if you’re in the woods naked and afraid you can adapt an empty aluminum can in a variety of ways without tools.
Soda Can Craft 101
Here’s the telegram. The thin aluminum on aluminum cans is extremely sharp. That’s a good thing if you’re trying to craft a knife, and the flexibility of aluminum makes it easy to puncture, cut, and manipulate, but be careful.
If you have gloves, wear them. You’re essentially working with sheet metal, and any sheet metal worker will be the first to tell you gloves are a really good idea.
There’s an assortment of tools that will come in handy if doing any work on aluminum cans including tin snips, heavy-duty scissors or shears, needle nose pliers, a hammer, and a hole punch.
There’s a good chance most of us could find those in our garage, but if you’re stranded in the woods, it’s highly unlikely that you packed some tin snips let alone any of those other tools.
Even without tools, you can actually do a lot when the only tool you have is an empty aluminum can you found in the forest. You’ll just have to improvise with sharp sticks, stones, and some careful twisting and pulling. Most of us might have a knife and if you do, you’re pretty much good to go.
Tips For Working With Aluminum Cans
The easiest way to cut into an aluminum can with tin snips or scissors is by starting a slit with a knife.
You then insert the shears into the slit to begin your cut. If all you have is a knife, use a sawing motion along the slit.
Many of these ideas require joining two halves of a can together. You need to crimp the rim of one of those halves to force-fit them.
Needle nose pliers are best, but you can improvise with a split in a stick pushed down on the edge of the can rim and twisted.
The easiest way to punch holes is with a nail. An improvised alternative is a stick sharpened to a point with its tip hardened in a fire. You can either hold the can and puncture it or place the can on a hard surface like a log or stump and drive the point home with a rock.
A knife tip twisted into the aluminum will also do the trick. All of this might be a good argument for including at least one nail in your survival kit.
Try to do a small fold-over on any exposed aluminum edges, especially if you might be handling that part of the aluminum or putting them up to your lips for a sip of water or to blow a whistle.
We might be wearing gloves while we’re working with the sheet aluminum but we don’t wear them all the time. Especially on our lips.
If you had the presence of mind to tightly roll and pack a yard of 1/2–inch wide duct tape in your survival kit, you can accomplish a lot with waterproofing your can, including making a canteen for transporting water.
Folding a piece of aluminum back and forth repeatedly will eventually cause it to break along that seam. Good to know if you have no way to cut your can.
A small piece of aluminum can be cut, bent, and pounded flat with a rock to create joints or hinges if you need one.
Aluminum Can Craft
1. Water Purification
A lot of pocket-sized, pre-packed survival kits seem to have everything. Unfortunately, they often fall short when it comes to water collection, purification, and storage.
An aluminum can will save the day with a minimal amount of work. It will let you boil water from a natural water source for the 3 minimum minutes recommended for purification. All you have to do is find the can, fill it with water, and start the fire.
Materials:
1 aluminum can
1 sharpened and peeled stick about 12-inches long
Directions:
1. Make two holes toward the top of the can. You’ll insert the stick through these holes when you want to remove it from the fire.
2. Filter the water through some fabric into the can and place it on or near the fire until the water boils.
3. Boil for at least 3 minutes and then carefully insert the stick through the holes to lift the can out of the fire.
2. Tinder Trap
Dry, flammable tinder is critical to successfully starting any fire. This is particularly true if you’re using a fire stick or other alternative fire-starting method. Unfortunately, great tinder is sometimes hard to find.
Want to prep but not sure where to begin?
Click Here to Get Your FREE One Year Urban Survival Plan!
Dried cattail fronds are good along with birch bark shavings, dried and crushed pine needles, fabric, dry reindeer moss, and especially char cloth which is a somewhat burnt and blackened piece of fabric.
Regardless of what and where you find your tinder, it’s important to keep it as dry as possible, and it’s great if you can store the surplus. This tinder trap concept is the foundation for some other ideas and it basically provides you with a re-sealable, weather-resistant container for tinder.
Materials:
2 aluminum cans
Knife or shears
Needle nose pliers or a stick with a split
Directions:
1. Cut the cans in half.
2. Set the halves with the pop-top opening aside. You want to use the two bottoms of the cans.
3. Crimp the edge of one of the cut cans with the needle-nose pliers or by working the split stick along the edge with repeated twists.
4. Place your tinder in the can bottom with the crimped edges.
5. Take the un-crimped half/can and press it over the bottom crimped can and push together until tightly sealed.
6. To open, twist off the top and retrieve your tinder.
You can also use the bottom of one of the cans to hold your tinder in a dry and high spot to make it easier to use your fire stick or drop your hot coals from a bow and arrow drill and blow your tinder into flame.
3. Signal Mirror
Anyone lost or stranded in the wilderness can increase their odds of being found if they can use a signal mirror to attract someone to their location. The bottom of an aluminum can will make an effective signal mirror, but it will require some polishing.
The good news is that this is another improvised tool that requires minimal labor on the can. You don’t have to cut or crimp a thing, just do some polishing on the concave bottom of the can.
Natural polish options include chocolate, toothpaste, mud, and clay. You make a paste and either use your fingers, some moss, or a piece of fabric to rub and buff and rub and buff some more. Check your progress as you go and try reflecting the polished can bottom into the ground and surrounding trees to see how you’re doing.
When you’re satisfied you can effectively signal. All you have to do is find someone or something in the distance that can see it.
4. Canteen
If you’re stranded or lost without a canteen or some other way to store and transport water, you’re going to be at the mercy of your next wild, water source. A few cans will quickly make for a watertight canteen or two that will allow you to hold and transport your recently purified and precious water.
This is where a short length of tape really helps. You can still create a fairly watertight seal without it, but the idea is to keep the water, not slowly lose it to a leak.
Materials:
2 cans for each canteen
Shears or a knife
Needle nose pliers or a stick with a split to crimp the edges
Enough duct tape (or other tape) to seal the seam around the can
Directions:
1. Cut the tops off of both cans just under the rim.
2. Crimp the edges of one of the cans.
3. Fill the crimped can with water.
4. Press the other can over the top and push down until tight.
5. Apply tape around the seam if you have it or roll the dice without it.
6. To open, twist the can and pull up.
5. Knife
This is simple. You want to cut a section of aluminum from a can and then embed the strip of aluminum in a split cut halfway down the length of a stick about ½-inch in diameter and about 8-inches long.
Tie off the top of the stick to keep the split tight using some cord or a section of shoelace.
You can use your can/knife to cut the cordage or shoelace. You can use it for light cutting and even filet a fish or use it to cut into another aluminum can to improvise another tool if you don’t have a knife.
This is nothing more than using the tinder trap/canteen concept for a different use. You repeat the rim crimping step on one of the cans and then force them together.
The good news is you don’t need a watertight seal like you would for a canteen. You could also overstuff both sides of the can as long as you get a decent fit when you force both sides together.
It’s great for collecting and transporting wild berries, sprouts, or anything else you forage while hiking, foraging and trying to find your way out of wherever you are.
7. Drinking Cup
It seems silly to make a cup out of something designed to hold liquid, but if you’re drinking something hot like a pine needle tea, it’s nice to have a handle.
This is where a fold along the lip edge of the cup is important. Aluminum edges are very sharp and cutting up your lips while taking a simple sip of tea is not the idea.
Materials:
1 soda can
Knife or shears
Directions:
1. Cut off the top 1/3 of the can leaving a 1-inch wide strip leading up to the top of the can.
2. Cut ¼-inch slits every inch down the top of the cut to create bendable tabs.
3. Bend the tabs inward to create a smooth rim.
4. Curl the metal strip down to make a handle.
A candle lantern can both protect the candle flame from the wind and the reflective interior of the aluminum can will act to reflect light from the lantern. Keeping the top of the can intact and inverting the can will also protect the flame from light rain or snow.
Just cut a curved arch opening in the side of the can with the concave bottom up. Drip some candle wax on the inside of the top lid to affix the candle and hope it doesn’t get too windy.
9. Cook Stove and Heater
This idea may seem complicated, but if you’ve made any of the other soda can tools, then you’re already familiar with some of the construction process.
It requires a flammable liquid which may be problematic in an extreme survival situation, but as both a stove and a heater it is surprisingly effective following a power outage as a result of a natural disaster or another domestic emergency.
The fuel of choice is isopropyl rubbing alcohol. 70% alcohol is the standard recommendation. Some people have reported successful results using vodka. The things to avoid are highly flammable liquids like gasoline, lighter fluid, and kerosene. There’s a possibility that they could explode. Alcohol, when used properly, is safer.
This concept can be used for cooking or as a heater in a small space. Like any open flame, it consumes oxygen and gives off gases as the alcohol burns. Some ventilation is recommended in enclosed spaces. Outdoors is less of an issue.
Materials:
2 soda cans
Knife or shears
Nail or knife point
A coin or rock
Rubbing alcohol or spirits
Fuel holding material such as dried peat, lichens, moss or fireproof insulation if available
Directions:
1. Cut the top 2/3’s of each can off.
2. Crimp one of the can bottoms around the edge.
3. Make holes around the rim of the second can and 5 holes in the center.
4. Fill with fabric, cattail fluff, dried moss, lichens or insulation.
6. Force the other can half with the holes over the crimped bottom.
7. Pour some alcohol on and around and light.
8. Once lit, drop the coin or rock over the center holes.
A survival whistle can come in handy in a survival situation, but to put it bluntly, making this whistle out of a soda can is a pain in the neck. Here’s a link to a video that shows you how to craft it.
It involves a lot of metal folding to keep your lips and tongue safe from the sharp edges. It works, but it’s a lot work. And be careful. Don’t cut your tongue.
11. Fish Hook
Here’s another very simple survival solution from a soda can. Only this time you’re using the metal pull tab from the top of the can rather than the can itself.
Any fisherman would take one look with a skeptical eye, but if it’s all you have, it’s worth a try. Of course, this assumes you might have some fishing line and if you had the foresight to pack some fishing line in a survival kit it stands to reason you might have included some hooks.
All that aside, here’s how to make a fishhook from a soda can.
Materials:
Pull tab from a soda can
Knife or wire cutters (some survival multi-tools have this feature)
Directions:
1. Cut out a section of the tab leaving a hook shape.
2. Tie it to your line, bait it, and yank that fish out of the water fast.
Practice
It’s worth trying a couple of these ideas so you get the hang of dealing with sheet aluminum. Once you’ve had some success, you may think of other ways you can use a soda can to create all those things you need to survive in the wild.
Sunday, November 28, 2021
Here’s How to Set Up a Chicken Brooder
By Rebekah Pierce
I don’t like having chicks this late in the year (August), but with meat birds, it doesn’t matter quite as much. They are mature in just eight weeks, so we don’t have to worry about them not putting on feathers in time for the cooler fall weather.
Even though these chicks will only be in the brooder for a short time, it’s important to take some time to set up the space appropriately.
There’s not much that you need to do, but there is a lot that you need to consider! Here are some tips on how to set up a brooder for five, ten, twenty – or even 100! – baby chicks.