Submissions     Contact     Advertise     Donate     BlogRoll     Subscribe                         

Thursday, May 11, 2023

ELDERBERRY WINE (& MEAD)

 Original Article


by 

Elderberry Wine

Elderberries are one of our favorite crops to grow, and every year we harvest buckets full of their dark, richly flavored fruits.  Their flavor is already rich, like a fine red wine and it only makes sense to put them into a bottle.

We made some of our first bottles of elderberry wine back in 2008, and that year we made elderberry mead as well.  We had around 26 bottles of the finished brew (from 3 gallons of each elderberry wine and elderberry mead), and we’ve been slowly working through that vintage ever since.

A new batch goes into the carboys each year, but they’re smaller, each about a gallon (roughly 4 bottles).  That allows us to compare the wine to the original batch, and it gets better every year. 

Elderberry wine and elderberry mead both age exceptionally well, so don’t be afraid to make a big batch (if you have the space to store it).  We’re now down to our last few bottles from the original 26, and though it’s had a good run for just shy of 15 years, I wish I’d made more.

Elderberry Wine

ELDERBERRY WINE VS. ELDERBERRY MEAD

The main difference between elderberry wine and elderberry mead is the choice of sweetener.  Unlike grapes, elderberries don’t have enough natural sugar to make a shelf-stable wine. 

The yeast would quickly eat all their available sugar, leaving something very dry and not very alcoholic.

For wine, you add sugar and that feeds the yeast and allows for a bit of residual sweetness in the finished wine.  With mead, the sweetener is honey, which not only adds flavor, it also changes the character of the beverage.

Honey wines have an incredible body and a much better mouthfeel than straight sugar-based country wines.  They ferment slower since honey is harder for the yeast to digest.  That means a lot of the volatile flavor compounds, both in the elderberries and in the honey, are preserved.

The downside is honey costs a lot more than sugar, around 5 times as much per pound.  The longer fermentation time also means you’ll be waiting longer before you can drink the finished beverage.

Personally, I prefer mead because I think wine often comes out a bit too light in body and doesn’t stand up quite as well to the rich flavor of elderberries. A full-bodied honey mead tends to balance the deep red wine notes in elderberries.

I’m already working with elderberries which are medicinal berries, I might as well go all in and use honey (even though it’s a bit more expensive).

Nonetheless, even if I prefer mead, they’re both truly exceptional, and I’ll give you instructions for making both elderberry wine and mead at home.

INGREDIENTS FOR ELDERBERRY WINE

While it may be possible to make grape wine with just sweet, vine-ripened wine grapes, other types of fruit wines require a few more ingredients to get the job done.

Grapes are sweeter than other fruits, and they’re the only ones with enough natural sugars to ferment completely without becoming unpalatably dry. They also have natural tannins to improve body and mouthfeel in the finished wine, and enough acidity to create a hospitable environment for successful fermentation.

Elderberries, on the other hand, have plenty of flavor and natural antioxidants, but they lack all the other essential characteristics that are required for good homemade wine.

No worries, it’s easy enough to resolve, and the process is no different than making any other country fruit wine.  You’ll need the following:

ELDERBERRIES (FRESH OR DRIED)

The fruits can be either fresh or dried, and in both ways the results are spectacular.

If using fresh fruit, they’ll be juiced to extract their flavor.  Fresh elderberries are hard to come by since they spoil fast, so you’ll likely only have access to these if you’re growing elderberries.

In the case of dried elderberries, you’ll simmer them in water to make an elderberry extract for this recipe. When dried they lose about half their volume, so you’ll only need about half as much dried elderberry for the same flavor.

This recipe uses 5 pounds fresh elderberries, which works out to about 10 cups of stemmed fruit.  If you’re using dried, you’ll want about 5 cups of dried elderberries.

Dried Elderberries

SUGAR (OR HONEY)

Wines need a certain minimum amount of sugar to feed the yeast, and if there’s not enough the yeast will quickly consume it all and stall out. The result is a very dry wine that’s not alcoholic enough to prevent spoilage.

By adding sugar, or honey, you’re giving the yeast enough fuel to make enough alcohol to stabilize the wine, plus a bit extra so that the wine is balanced (not too dry). This is not optional.

For a gallon, you’ll need roughly 2 1/2 pounds of sugar, or about 3 pounds of honey.

WINE YEAST

The actually finished alcohol level is determined by your choice of yeast (not how much sugar you add).  Different strains of yeast have different alcohol tolerances, which means they die out when the ABV reaches a certain percentage.

Beyond producing alcohol, wine yeast actually contribute a lot of flavor to the finished wine.  They can metabolize acids into different compounds, and produce volatile esters that can give floral, fruity, or other flavors to the wine.

Do not use bread yeast…that warm yeasty scent of rising bread doesn’t come from the flour, it comes from the yeast.  Your finished wine will taste like bread.

Good choices for elderberry wine include:

  • Lavin D47 ~ Adds strong floral and fruity characteristics to wines, and would complement the complexity of elderberry wine nicely.  Only a moderately vigorous fermenter, so it may start slowly.  Alcohol tolerance to 15%, ideal temperature range 59 to 86 F.
  • Montrachet or Premier Classique ~ A strong fermenter known for producing full-bodied red wines.  It preserves the natural tannin content of the fruit and leaves the wine with intense color.  Alcohol tolerance is relatively low (only 13%), so a good choice if you’d like more residual sweetness.  Ideal fermentation temperatures 59 to 86 F.
  • Cote des Blancs (Geisenheim Epernay) ~ Brings out the fruit character and sweetness of both red and white wines.  A slow fermenter with low foaming, it’ll take longer to finish but help to maintain volatile esters and subtle flavors.  Low alcohol tolerance, especially when fermented at low temperatures, which means more residual sugars.  Alcohol tolerance to 12-14%, ideal temperature range 64 to 86 F.
  • Red Star Premier Cuvee or Lavin EC-1118 ~ Generally known as champagne yeasts, these are strong fermenters with a neutral taste.  They’ll get the job done efficiently, but without adding much flavor (good or bad).  If you choose this yeast, I’d suggest adding an extra 1/4 pound of sugar to the batch so it doesn’t come out too dry.  It has a high alcohol tolerance, usually around 15% but up to 18% in ideal conditions, so without extra sugar you’ll have a very dry wine.  Ideal temperature range 59 to 86 F.

YEAST NUTRIENT (OR RAISINS)

While grapes have all the nutrients that wine yeast needs to survive, other fruits are often deficient. Adding powdered yeast nutrient is a simple way to ensure the yeasts have everything they need to thrive (since they can’t live on just sugar alone).

You can also add in a handful of raisins which will give them trace nutrients, but it’s less dependable, and the raisins tend to add flavor to the finished wine. (Not Optional)

ACID BLEND (OR LEMON JUICE)

Though elderberries are fruits, they’re not very acidic. Most other fruits have more acidity, and in fact, they’re not even acidic enough for canning when you make homemade elderberry jelly (unless you add lemon juice).

Wines need a certain amount of acidity to create a hospitable environment for the yeast, bring out the flavor of the fruit and balance the residual sweetness. You can use a powdered acid blend that is formulated for winemaking and yields consistent results, or you can use lemon juice.

(You’ll need 1 TABLEspoon of lemon juice for every teaspoon of acid blend in a recipe.)

Most fruit wine recipes use around 1 tsp per gallon, but elderberry are especially alkaline so I’d suggest going with 1 1/2 tsp per gallon.  If you’re setup to test for pH, you’re looking for a ph between 3.4 and 3.6 to start, or if not, you can just go with the generic recommendation of 1 1/2 tsp per gallon.

PECTIC ENZYME

This is a natural enzyme that breaks down pectin in fruits, which helps clarify the wine.  It’s mostly necessary for high pectin fruits like apples when you’re making apple wine, but it’s helpful even for low pectin fruits like elderberries.

Adding pectic enzyme powder optional, but using it will clarify the wine and give you a better-finished look in the glass.  It’s completely optional.

(Freezing the fruit also breaks down pectins, so that’s another alternative.)

TANNIN

The natural tannin in grapes, especially grape skins, balances out the natural sweetness of wine. More importantly, it also contributes to mouthfeel and can give wine what’s known as “body.” Without a bit of tannin, wine tastes thin and watery, even if it otherwise has plenty of flavor.

While most fruits lack natural tannins, elderberries actually contain tannins just like grapes.  You can add winemaking tannin if you like, which will give a bit more bite to the wine, but it’s not necessary in this case.

We use tannin powder in almost all our home winemaking recipes, but it’s optional in elderberry wine.  If you do add it, go with just a tiny pinch.

Elderberry Wine

EQUIPMENT FOR ELDERBERRY WINE

The equipment you need to make elderberry wine is pretty basic, and it’s the same stuff you’d need to make homemade beerhard cider, or really any fermented beverage.

A small upfront investment will keep your bottles full for a lifetime.

One Gallon Glass Carboy (x2) ~ A narrow neck fermentation vessel, also called a carboy, contains the elderberry wine during fermentation (primary and secondary).  The narrow neck minimizes air exposure, keeping it from turning to fruit vinegar.  You’ll need two (one-gallon each).

Rubber Stopper and Water Lock ~ Basically a one-way valve that allows CO2 to escape, but prevents contaminants from entering the fermentation vessel.  Basically, it limits oxygen exposure to prevent the wine from turning to vinegar (especially during secondary fermentation).

Both the fermenter, water lock, and rubber stopper often come in a kit that includes all three.

Brewing Siphon ~ Used to move the elderberry wine from one container to another and allows you to neatly leave the sediment behind.  If you just pour the mixture, you’ll get sediment into the mix, and you’ll add oxygen which helps promote vinegar (rather than alcohol).  A siphon is also the best way to bottle the wine.

Wine bottles ~ The best option for bottling, and really the only thing I recommend for elderberry wine since it’s best after bottle aging.  You can also use flip top Grolsch bottles, but that’s only good for short-term storage.  You’ll also need a Bottle Corker as well as clean, new corks for bottling.

Lastly, Brewing Sanitizer is a one-step no-rinse sanitizer that cleans everything and helps to prevent contamination.  It’ll make the winemaking process more predictable, and it’s always good to keep your equipment clean.

HOW TO MAKE ELDERBERRY WINE

The process for making elderberry wine is the same as making any other type of fruit wine. The basic steps are as follows:

  • Juice the Elderberries (or make an extract from dried elderberries)
  • Dissolve sugar or honey in the juice, along with the other additives
  • Add water to fill the fermentation vessel
  • Dissolve yeast in a bit of water to re-hydrate, and then add it to the mix
  • Seal with a water lock and ferment for 10 to 14 days (Primary Fermentation)
  • Use a siphon to transfer the mix to a different container, leaving the sediment behind
  • Re-attach the water lock and ferment for another 4 weeks to 6 months.
  • Bottle the wine
  • Bottle age at least 2 weeks, preferably 2 to 12 months, before drinking

The whole process starts by first stemming and then juicing the elderberries.  The stems where the elderberries are attached to the bunch can give a bitter flavor to elderberry wine, and it’s best to remove them before getting started.

I know, it’s a pain to stem elderberries…but it’s worth it.  Freezing the clusters can make it easier to stem them, as they pop right off when frozen with just a gentle combing of your fingers.

(Freezing also denatures some of the pectin in fruits, which can make wine cloudy.  Elderberries are already low pectin, but freezing them will still help clarify the wine in the end, so it’s helpful beyond just de-stemming.)

Once they’re stemmed, they can be juiced by placing them in a pot with enough water to just cover.  Bring it to a gentle simmer, masing with a potato masher to help the fruit fall apart.

Strain through a double layer of cheesecloth or a jelly bag.  Discard the solids.

(Alternately, you can place the elderberries in a brew bag and place it into your fermentation bucket for primary.  I think it’s cleaner to just juice them and discard the solids, and the flavor is about the same either way.)

Next, dissolve the sugar (or honey) in the extracted juice, adding enough water to bring the total volume up to a bit short of a gallon.  (You’ll need a bit of extra space for the yeast and other ingredients.)

Gently warming the mixture on the stove can help the sugar or honey dissolve.  Once dissolved, cool completely, and add the remaining ingredients (except yeast).  Stir to incorporate.

Pour the mixture into a fermentation vessel, usually a narrow neck demijohn (aka. 1-gallon carboy).  Dissolve the yeast in a bit of water and allow it to re-hydrate for about 10 minutes.  Next, pour it into the fermentation vessel.

Cap the fermentation vessel with a water lock and allow the mixture to ferment for 7 to 10 days.  This is known as primary fermentation and it’s when the bulk of the sugar will turn into alcohol.  It should be vigorous, with a lot of bubbling.

When things calm down and it’s only bubbling once every few minutes, usually at around 7 to 10 days, it’s time to use a sciphon to move the mixture to a clean fermentation vessel.  The “lees” of sediment on the bottom of the container can contribute off-flavors to a batch, so you need to get the elderberry wine off of them for secondary fermentation.

In secondary fermentation, things are going to go a lot slower, but this is where most of the complex flavors develop.  You shouldn’t see a lot of bubbling, but the yeast are still working, albeit slowly.  The flavors in the wine will mellow, and a lot of the character is developed in this stage.

Leave the wine to ferment in secondary for at least 3 to 4 weeks (with a sugar wine) or at least 2 months for a mead.  If you have the patience, waiting about 6 months to bottle will usually improve the finished quality dramatically. (After 6 months, additional time doesn’t really improve the wine that much, as most of the gains happen in that initial 6 months of secondary). 

Anywhere in between also works, it really comes down to your patience. 

Once you’re ready to end secondary fermentation, bottle the wine (or mead) in wine bottles with corks.

If you’re not planning on aging the wine, you can get away with flip-top Grolsch bottles if you’re only storing the wine for 1-2 months.  Anything longer than that and you’ll really want wine bottles, which I recommend for quality in any case.

Elderberry wine is drinkable after a few weeks in the bottle, but it won’t be at its prime.  I’d suggest waiting at least 6 months to allow the wine to bottle condition. 

It’ll only get better with age after that.

Elderberry Wine

ELDERBERRY RECIPES

Looking for more ways to use elderberries?

Elderberry Wine
YIELD:MAKES 1 GALLON (4 BOTTLES)

ELDERBERRY WINE (& MEAD)

Elderberry wine is the perfect way to use elderberries, and their flavor comes through beautifully in this homemade beverage. Use honey to make elderberry mead instead.

No Ratings

INGREDIENTS

INSTRUCTIONS

  1. Sanitize all equipment before beginning.
  2. Stem the elderberries (if fresh) and juice them by placing them in a stockpot. Add water to just barely cover and simmer for a few minutes, mashing with a potato masher to help them release their juices. (If using dried elderberries, simmer 5 cups dried elderberries in about 10 to 12 cups water for about 15 minutes.)
  3. Strain through a jelly bag or double layer of cheesecloth. Discard solids and retain juice.
  4. Pour the juice back into a clean pot and add sugar (for wine) or honey (for mead). Slowly warm while stirring to encourage the sugar to dissolve. When fully dissolved, remove from heat and cool completely.
  5. Add remaining ingredients (except yeast) and stir to incorporate. Pour cooled mixture into a fermentation vessel and add water until nearly full, leaving space to the yeast.
  6. Dissolve the yeast in a small amount of water (1/4 to 1/2 cup) and allow it to rehydrate for 10 minutes. When rehydrated, add it to the fermentation vessel with the rest of the ingredients.
  7. Seal the fermentation vessel with a water lock and allow the mixture to ferment in primary for 7 to 10 days, until fermentation slows.
  8. When fermentation slows, use a siphon to rack the mixture into a clean fermentation vessel, leaving the sediment behind. Add clean, chlorine-free water to fill.
  9. Re-seal the vessel with an airlock and ferment in secondary for at least 4 weeks, preferably much longer and up to 6 months. Honey meads need longer in secondary.
  10. Bottle the mead in wine bottles with corks, and bottle age for at least a few weeks (preferably several months or years) before drinking.

NOTES

Good yeast choices for elderberry wine include:

  • Lavin D47 ~ Adds strong floral and fruity characteristics to wines, and would complement the complexity of elderberry wine nicely.  Only a moderately vigorous fermenter, so it may start slowly.  Alcohol tolerance to 15%, ideal temperature range 59 to 86 F.
  • Montrachet or Premier Classique ~ A strong fermenter known for producing full-bodied red wines.  It preserves the natural tannin content of the fruit and leaves the wine with intense color.  Alcohol tolerance is relatively low (only 13%), so a good choice if you'd like more residual sweetness.  Ideal fermentation temperatures 59 to 86 F.
  • Cote des Blancs (Geisenheim Epernay) ~ Brings out the fruit character and sweetness of both red and white wines.  A slow fermenter with low foaming, it'll take longer to finish but help to maintain volatile esters and subtle flavors.  Low alcohol tolerance, especially when fermented at low temperatures, which means more residual sugars.  Alcohol tolerance to 12-14%, ideal temperature range 64 to 86 F.
  • Red Star Premier Cuvee or Lavin EC-1118 ~ Generally known as champagne yeasts, these are strong fermenters with a neutral taste.  They'll get the job done efficiently, but without adding much flavor (good or bad).  If you choose this yeast, I'd suggest adding an extra 1/4 pound of sugar to the batch so it doesn't come out too dry.  It has a high alcohol tolerance, usually around 15% but up to 18% in ideal conditions, so without extra sugar you'll have a very dry wine.  Ideal temperature range 59 to 86 F.

RECOMMENDED PRODUCTS

As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.

WINEMAKING RECIPES

Keep your carboy bubbling with these home winemaking recipes:

MEAD RECIPES

Honey wines are my favorite, and there are plenty of mead recipes to choose from…

How to Make Elderberry Wine

No comments:

Post a Comment